vaso stupendo con tutorial da fare
sempre girando per siti ho trovato quest'artista favolosa che produce molte cose da sola e sono veramente originali..
..For concrete votives you’ll need following:
..For concrete votives you’ll need following:
1 part concrete
4-5 part sand, please prepare the concrete according to the label directions.
Water
A mould to cast in, I used an empty soda can.
A bowl to mix your concrete in, and a spoon.
Paint stick to tap up and down in the mix to prevent air bubbles.
4-5 part sand, please prepare the concrete according to the label directions.
Water
A mould to cast in, I used an empty soda can.
A bowl to mix your concrete in, and a spoon.
Paint stick to tap up and down in the mix to prevent air bubbles.
Mix concrete and sand and be sure that it’s well mixed. Add a very small amount of water and mix. Less water the stronger your castings will be.
Pour your mix in your mold and tap up and down, shake your mold gently, so the concrete will even out. Put a candle on the top of the concrete and place something on it, or else the candle will be pressed up while the concrete is curing.
Pour your mix in your mold and tap up and down, shake your mold gently, so the concrete will even out. Put a candle on the top of the concrete and place something on it, or else the candle will be pressed up while the concrete is curing.
Leave it to dry overnight and once dried, gently pull the mold of.
Remeber to use gloves and it’s a good idea to cast outside, to prevent exhaling the concrete when casting.
Commenti
Posta un commento